Google

oral winstrol

Important!! The following is a text only archive!
For full features; Go to oral winstrol

posted by Sanchez
i read in another forum that you can make oral winstrol by mixing 1 gram of winstrol powder with 49 grams of protein powder instead of PEG 400 (actually could it be possible for someone to explain exactly what PEG 400 is and does?) Also if memory serves me correctly you could mix the winny with gatorade

P.S. - just things I read......thanks

Sanchez

posted by jcvaughn26
Well when you say mixing with protien powder I am guessing they were talking about capping it. I have heard that you can use protein powder as filler. This was posted by budlite74....

Written by budlite74@ anabolicalchemy

Bro, i used this setup..
HERE IS MY PROCES OF CAPPING POWDER WINY

I used protein powder as filler for the winny

OK.... with a 50cap machine....

I started by filling one 00 size cap with protein powder to see how much each cap will need to fill.... what came out to .39g (only the bottom half of the cap)

So .39 times 50 (50 caps) = 19.5g

Now I wanted 50mg per cap... so 50 times 50 = 2500mg or 2.5g

So... 19.5g minus 2.5g = 17g of protein powder to mix with the 2.5g winy

Put all ingredience (sp?) in a baggy or shaker and mix really good and for a while...

***note .... the protein powder and winy powder were different in texture so it did not mix 100%, there were little pieces around, but no more that 10% error... ***

fill the machine with 00 size caps and pour the powder over it and spread with the spreader thing..... and cap....

Now you have 50 caps @ around 45-50mg per cap!


50 caps filled with chacolate protien powder (17g's of it) to make 50 50mg caps

and

50 caps filled with sugar (38g's or it) to make 50 50mg caps

the surgar weighs more ... more mass... so it took more to fill then the protien powder... this is why the big difference in grams ...

I have just also tried Corn Starch.... Corn Starch is by far the best filler to use... very much like the texture of the powder winy!


The peg recipe can be actually made into an injectable. This was posted by Tapout........

#1

Mix 1 g winny plus 1 ml ba plus 2.5 ml PEG 400 in to vial.
Heat until mix goes into solution (clear liquid)
Remove from heat and filter with .45 whatman into sterile vial.
Add 15.5 ml bac water to filtered product slowly but does not have to be drop by drop as you will notice the winny will not easily come out of solution-took me 30 seconds to add all the water-slowly but not drop by drop.
Swirl vial slowly until it seems cloudy and well mixed.
Shake the hell out of it as hard as you can...this will pull the winny out of solution and into suspension.
Cap and voila!
20ml at 50mg/ml sterile aqueous stanozolol suspension.
This is as easy as it gets!

or this way

How does a much easier injectable winny recipe that has virtually no chance of crashing sound?

Materials needed
PEG 400
BA 2%
BB 15%
Winny powder
Filter
Open Vial
Sterile Vial
5 or 10 cc sryinge
3 cc syringe
18 guage needle
smaller needle to relieve air pressure

Instructions:

1- Take the winny powder place in a open vial add BA & BB.
2- Heat vial till winny melts. I set mine in a frying pan on the eye of a stove, bring to heat slowly, and let cool slowly.
3- Add peg to mixture. Save 3 ml of you peg in the 3 ml syringe so you can purge the filter with just peg, so no winny is left.
4- Filter into a sterile vial.
5- Finished, should be a clear thick liquid.


For 5 Grams at 50mg/ml add
2ml BA
15ml BB
79.25ml PEG 400
5 Grams Winny

For 10 Grams at 50mg/ml add
4 ml BA
30 ml BB
158ml PEG 400
10 Grams Winny

PEG is usually called.........pentaethylene glycol or peg400 sorry I don't know much about it I have never used it in any of my conversions I would have to do some research on it myself.

posted by regino007
PEG-400 is a liquid carrier for either oral or inj prepartions.It taste bad as well.Some ppl use PEG or Everclear to mix the powder and make an oral solution.

posted by A.B
Once you cap, you dont go back.... :D

I will no longer buy oral steroids. I only get the powder shipped to me where I cap them myself. SOOOOOOOOO much more cheaper and it works just as good. :)

posted by jcvaughn26
Where can I get a capper??

posted by Smallguy
search for cap-m-quick and there is antoher knid that Thrower74 uses pm, him over at MF

Smallguy

posted by jcvaughn26
found one at 1fast400.com

posted by Smallguy
apparently there is a better machine out there than the cap-m-quick but u'd need to ask thrower for the name of it . It acutaly joins the caps for you with the cap-m-quick u have to do it manually.

posted by gymphreak
if you are over 21, or have parents that dont care you drink.......just fire the winny into some everclear and ur set

posted by jcvaughn26
I want to cap just because it would be more convenient then having to suspend it. Especially with dbol because you don't want to take that in one dose. If I was going to make winny in liquid I would make it injectable using some mr. T super solvent or something like that just in case I wanted to inject it, either way you can drink it. Just my 2 cents for the guy that start this thread.

posted by gymphreak
true, but as ive been an experienced chemist for a while, i find capping such an annoying project especially the first time around, since he will have to get a scale, capper, caps, etc....wheres suspending is so much better IMO....Plus to just get a capper to do one batch of winny is just a waste of money and shipping really

posted by jcvaughn26
I'm sure I'll do it again and I am going to start capping b5 and other supplements and save some money.

* Add Your Comment - Ask a question *
Share the knowledge!