need reciepe for 500mg/ml

Important!! The following is a text only archive!
For full features; Go to need reciepe for 500mg/ml

posted by 250

Has anybody made 250mg of enanthate and 250 mg of cypionate in one ml?
If so how much ba and bb?

posted by Storm

From what I heae cyp is hard to keep stable above 250mgs per ml so good luck..I have personally seen it gel up at 300mgs...

posted by regino007

Use a 2/20 ratio and see if it holds.Don't think it will and you better use a 100ml bottle when converting ea to hold that much powder.

posted by regino007

I've been doing some research on your question. I have found that the most test e will hold and not be so painful is around 400mg/ml.And that was using a 5/22 ratio. Test cyp will be so painful at that mg due to the amount of BA that would be used.

posted by gymphreak

your best off to make 500mg/ml test enanthate like i said in the reply PM to you. If you are a newbie to aas usage, then you do not have to make the oils at 500mg/ml, but if you are a seasoned vet with alot of cycles under your belt, then you should be able to tolerate 500mg/ml test enanthate really well, since youd be used to painful injects of large ammts of oil at once.

posted by 250

thanks guys

posted by batfink0

Agreed with Phreak.....
Wouldnt make sense anyway...
Why have that high of dossages when you should be injecting EOD. Do both at 300mg/ml and alternate days of injections. driving in 500 of each in one shot, will be DAMN painful (but easily brewed), and a shock to your horemone levels. Nice steady levels of Aas can be the deciding factor for bad side effects. Always follow the K.I.S.S. rule
Keep It Simple Stupid.
Unless your a seasoned Vet...
My guess is that your trying to get away with doing one injection/week???? This will not work my friend.

posted by 250

1500mg is a min for me

posted by basskiller

your best bet is to not try and make any gear this high mgs/ml ratio.
even if you succeed, you'll most likely need to cut it with something else because of the pain being too great.. Higher is not always better

* Add Your Comment - Ask a question *
Share the knowledge!

+
+
+
+
+
+ ...

+
+
------
+
+
+
------
+
+
+
+